Landquip Crop Sprayers, Suffolk

+44 (0)1379 588286 | sales@landquip.co.uk

Metfield Road, Fressingfield, Suffolk, IP21 5SD, Uk Tel +44 (0)1379 588286 | Email sales@landquip.co.uk

A range of trailed sprayers built to the highest quality and incorporating as standard all the features to be expected on a high specification sprayer. The Electrac has 2 drawbar options enabling tight tracking turns on rowcrop and flotation wheels. Electrac standard features include:- • In cab hydraulic controls • Fully tracking electrically sensed twin ram steering drawbar • Pick up hook drawbar or Scharmuller Euro high hitch (Optional) • Taper roller bearing pivots • In cab control for manual/crab steer & electronic auto tracking • Rowcrop 340/85 R46 (13.6) – 1747mm diameter or 380/90 R46 (14.9) – 1842mm diameter • Full size 620mm (24”) wide mudguards + mud flap extensions • Wheel track 1.5-2.0 metres (60-80”) - tyre inside to inside minimum 1100 mm • 6.5 tonne, 1910mm wide axle, 8 x 20mm studs at 275 pcd, 220 hub, c/w hydraulic brakes • Up to 750mm axle clearance • Aeon rubber spring suspension or air suspension (Optional) • 2500 or 3000 litre polyethylene tank complete with tank sump drain & 330 litre wash tank • Superb in tank agitation via stainless steel spreader bar • Mechanical, chemical-less sight tube • 2 tank washing rotaflush heads • 15 litre operator hand wash tank • Large 44 litre lockable clothing cabinet • Electro-hydraulic controls for boom folding • 1 tractor single acting spool valve required with approx. 25 litre/min. oil flow • ‘Gull wing’ Alu-light bi-fold booms from 18 to 28 metres • Trapezium self-levelling boom with hydraulic boom tilt • Hydraulic anti-yaw protection (Patented) • Stainless steel ½” spray lines + spray line semi-recirculation • Removable quick fit boom tube end fork fittings • Tri, quad, or quin 360o nozzle bodies + 2 sets of multi select colour coded quick fit caps • 2 sets of ceramic ISO colour coded tips • Boom pressure filters • Manual in-cab electric switching for spraying, washing out, etc • Master, pressure & 5 section valves • Bravo 400s CanBus colour display electronics for rate control, individual boom section switching, application volume and pressure read- outs, forward speed, tank volumes, etc • Large 2” suction filter • PTO driven 330 litre/min. 5 cylinder piston diaphragm pump • Swing down 30 litre easy clean chemical bowl with can wash, rinse & agitation jets • 2.6 metre transport width • High lift parallelogram offering spray heights from 0.5 to 2.3 metres • Rear LED road lights, indicators, and flashing beacon • Parking stand • 6 metre x 2” suction/fill hose • M6-M16 stainless steel nuts & bolts + stainless steel hoseclips throughout

Factory fitted options for Electrac:- • Manual 7 section in-cab switch box & electric on/off boom section valves • Poziflow air nozzle switching & continuous recirculating boom sections (Air taken off tractor) • Air blow-out system to reduce chemical residues in boom spraylines (Available with Poziflow recirculating boom option only) • GPS automatic boom section control of up to 13 sequentially switched boom sections c/w dual frequency correction antenna, coverage mapping & guidance light bar + Poziflow air nozzle switching & continuous recirculation giving high pressure spray line prime & purge (Air taken off tractor) Options available in lieu of Bravo 400s:- • Delta 80 CanBus 8.4” colour display controller • IsoBus electronics for rate control via in-cab VT display screen, GPS automatic boom section control of up to 13 sequentially switched boom sections + Poziflow continuous recirculation giving high pressure spray line prime & purge (Air taken off tractor) • Air compressor system & reservoir (PTO driven off back of spray pump) • Air suspension (Air taken off tractor) • Hydraulic park jack • Scharmuller Euro high hitch for 80mm ball drawbar c/w hydraulic pump drive • Hydraulic drive for piston diaphragm pump • 450 litre/min. piston diaphragm pump (in lieu of 330 litre/min.) • Hydraulically driven 700 litre/min. centrifugal pump & self priming adaptor • Variable geometry booms + 2 extra spools • Independent outer section folding • Outer section hydraulic break-back (pressure relief) • Outer section auto-reset hydraulic break-back • 11 litre/min. high pressure 190 bar wash-down kit, hose reel and hand lance • Chemical hopper suction probe • Bowser 2" fast fill • Boom mounted LED blue spray pattern illumination lights • LED side marker lights • Electric headland / boom end nozzle • Orion stand-alone 2” in-fill electro-magnetic flow meter with display screen Available options with Bravo 400s, Delta 80 & IsoBus only:- • Joystick control • Orion stand-alone 2” in-fill electro-magnetic flow meter with programmable display at fill station with electrically operated cut-off/stop valve • Syncro automated filling & wash system c/w 2” in-fill electro-magnetic flow, stainless steel electrically operated suction & pressure ball valves, tank content & function control at fill station linked to in-cab control screen • Camera(s) - up to 2 (compatible with Bravo 400s or Delta 80) • Seletron electrically operated GPS automatic shut-off management (via Bravo, Delta or IsoBus of each individual nozzle plus automatic nozzle-by-nozzle selection of up to 4 different nozzles to retain spray quality according to speed and spray rate (Seletron Torque Wrench is supplied with each machine) • Norac UC7 3 sensor Active Roll & variable geometry independent left & right hand ultimate boom height control system • Norac UC7 severe terrain kit (if required) – additional 2 sensors • Stand-alone 3 sensor variable geometry independent left & right hand boom height control system • Umbrella fertiliser nozzles c/w seal & metering disc • Wheel options:– Diameter (mm) 420/80 R46 (16.9) 1872 480/80 R42 (18.4) 1838 520/85 R38 (20.8) 1855 580/70 R38 1836 • Fixed non-steering drawbar for those not requiring a tracking trailed sprayer

Metfield Road, Fressingfield, Suffolk, IP21 5SD, Uk Tel +44 (0)1379 588286 | Email sales@landquip.co.uk

Technical | Boom | Options | Video | Downloads

A range of trailed sprayers built to the highest quality and incorporating as standard all the features to be expected on a high specification sprayer. The Electrac has 2 drawbar options enabling tight tracking turns on rowcrop and flotation wheels. Electrac standard features include:- • In cab hydraulic controls • Fully tracking electrically sensed twin ram steering drawbar • Pick up hook drawbar or Scharmuller Euro high hitch (Optional) • Taper roller bearing pivots • In cab control for manual/crab steer & electronic auto tracking • Rowcrop 340/85 R46 (13.6) – 1747mm diameter or 380/90 R46 (14.9) – 1842mm diameter • Full size 620mm (24”) wide mudguards + mud flap extensions • Wheel track 1.5-2.0 metres (60-80”) - tyre inside to inside minimum 1100 mm • 6.5 tonne, 1910mm wide axle, 8 x 20mm studs at 275 pcd, 220 hub, c/w hydraulic brakes • Up to 750mm axle clearance • Aeon rubber spring suspension or air suspension (Optional) • 2500 or 3000 litre polyethylene tank complete with tank sump drain & 330 litre wash tank • Superb in tank agitation via stainless steel spreader bar • Mechanical, chemical-less sight tube • 2 tank washing rotaflush heads • 15 litre operator hand wash tank • Large 44 litre lockable clothing cabinet • Electro-hydraulic controls for boom folding • 1 tractor single acting spool valve required with approx. 25 litre/min. oil flow • ‘Gull wing’ Alu-light bi-fold booms from 18 to 28 metres • Trapezium self-levelling boom with hydraulic boom tilt • Hydraulic anti-yaw protection (Patented) • Stainless steel ½” spray lines + spray line semi-recirculation • Removable quick fit boom tube end fork fittings • Tri, quad, or quin 360o nozzle bodies + 2 sets of multi select colour coded quick fit caps • 2 sets of ceramic ISO colour coded tips • Boom pressure filters • Manual in-cab electric switching for spraying, washing out, etc • Master, pressure & 5 section valves • Bravo 400s CanBus colour display electronics for rate control, individual boom section switching, application volume and pressure read-outs, forward speed, tank volumes, etc • Large 2” suction filter • PTO driven 330 litre/min. 5 cylinder piston diaphragm pump • Swing down 30 litre easy clean chemical bowl with can wash, rinse & agitation jets • 2.6 metre transport width • High lift parallelogram offering spray heights from 0.5 to 2.3 metres • Rear LED road lights, indicators, and flashing beacon • Parking stand • 6 metre x 2” suction/fill hose • M6-M16 stainless steel nuts & bolts + stainless steel hoseclips throughout

Factory fitted options for Electrac:- • Manual 7 section in-cab switch box & electric on/off boom section valves • Poziflow air nozzle switching & continuous recirculating boom sections (Air taken off tractor) • Air blow-out system to reduce chemical residues in boom spraylines (Available with Poziflow recirculating boom option only) • GPS automatic boom section control of up to 13 sequentially switched boom sections c/w dual frequency correction antenna, coverage mapping & guidance light bar + Poziflow air nozzle switching & continuous recirculation giving high pressure spray line prime & purge (Air taken off tractor) Options available in lieu of Bravo 400s:- • Delta 80 CanBus 8.4” colour display controller • IsoBus electronics for rate control via in-cab VT display screen, GPS automatic boom section control of up to 13 sequentially switched boom sections + Poziflow continuous recirculation giving high pressure spray line prime & purge (Air taken off tractor) • Air compressor system & reservoir (PTO driven off back of spray pump) • Air suspension (Air taken off tractor) • Hydraulic park jack • Scharmuller Euro high hitch for 80mm ball drawbar c/w hydraulic pump drive • Hydraulic drive for piston diaphragm pump • 450 litre/min. piston diaphragm pump (in lieu of 330 litre/min.) • Hydraulically driven 700 litre/min. centrifugal pump & self priming adaptor • Variable geometry booms + 2 extra spools • Independent outer section folding • Outer section hydraulic break-back (pressure relief) • Outer section auto-reset hydraulic break-back • 11 litre/min. high pressure 190 bar wash-down kit, hose reel and hand lance • Chemical hopper suction probe • Bowser 2" fast fill • Boom mounted LED blue spray pattern illumination lights • LED side marker lights • Electric headland / boom end nozzle • Orion stand-alone 2” in-fill electro-magnetic flow meter with display screen Available options with Bravo 400s, Delta 80 & IsoBus only:- • Joystick control • Orion stand-alone 2” in-fill electro-magnetic flow meter with programmable display at fill station with electrically operated cut-off/stop valve • Syncro automated filling & wash system c/w 2” in-fill electro- magnetic flow, stainless steel electrically operated suction & pressure ball valves, tank content & function control at fill station linked to in-cab control screen • Camera(s) - up to 2 (compatible with Bravo 400s or Delta 80) • Seletron electrically operated GPS automatic shut-off management (via Bravo, Delta or IsoBus of each individual nozzle plus automatic nozzle-by-nozzle selection of up to 4 different nozzles to retain spray quality according to speed and spray rate (Seletron Torque Wrench is supplied with each machine) • Norac UC7 3 sensor Active Roll & variable geometry independent left & right hand ultimate boom height control system • Norac UC7 severe terrain kit (if required) – additional 2 sensors • Stand-alone 3 sensor variable geometry independent left & right hand boom height control system • Umbrella fertiliser nozzles c/w seal & metering disc • Wheel options:– Diameter (mm) 420/80 R46 (16.9) 1872 480/80 R42 (18.4) 1838 520/85 R38 (20.8) 1855 580/70 R38 1836 • Fixed non-steering drawbar for those not requiring a tracking trailed sprayer