Landquip Crop Sprayers, Suffolk

Electronics

Bravo 180s A compact flow or pressure based electronic rate controller with multi information selectability, tank level, 10 spray rate/nozzle configurations and visual/audible alarms, rpm speed sensor, control of 5 or 7 boom sections and up to 7 hydraulic functions. Bravo 300s A flow or pressure based controller, capable of manually controlling 5, 7 or sequential switching of up to 13 sections and up to 9 hydraulic functions enabling independent left and right boom geometry control. (Only required in lieu of Bravo 180s if more than 7 hydraulic folding functions are needed on a machine) Bravo 400s LT The 400s LT is a 5.7" colour display controller offering GPS automatic shut-off management of 7 switched boom sections to avoid spray overlap and off target spraying and 7 hydraulic functions for boom folding. Coverage mapping & integral guidance navigation screen enables fertiliser variable rate management via Shape prescription mapping. Smart 6L (L1+L2) dual frequency correction antenna. Bravo 400s The 400s is a high end CanBus 5.7" colour display controller offering GPS automatic shut-off management of 5, 7 or sequential switching of up to 13 sections to avoid spray overlap and off target spraying and up to 9 hydraulic functions enabling independent left and right boom geometry control, and steering options for drawbar or axle. Coverage mapping & integral guidance navigation screen enables fertiliser variable rate management via Shape prescription mapping. Smart 6L (L1+L2) dual frequency correction antenna. Delta 80 The Delta 80 is the ultimate controller with all the features of the 400s housed in a new design case with 8.4" screen, 2 USB ports, WiFi, and Ethernet 10/100 port connections. Smart 6L (L1+L2) dual frequency correction antenna. IsoBus This system is based on a single monitor in the cab, named Virtual Terminal (VT), through which all parameters of the tractor & sprayer can be seen, managed and set up. An IBX is installed to check all functions and communications between the sprayer & the VT in the cab via the IsoBus socket. An auxiliary in-cab switch box controls all spraying and hydraulic functions.

Download brochure

Boom Height Control Options Norac UC7 3 sensor boom height control of raise/lower and individual left and right variable geometry (VG) with active wing roll correction system using Landquip's inclination/tilt cylinder Norac UC7 severe terrain kit (if required) – additional 2 sensors. Stand-alone 3 sensor variable geometry independent left & right hand boom height control system. Bravo 400s, Delta 80 & IsoBus Options Seletron electrically operated GPS automatic shut-off management (via Bravo, Delta or IsoBus) of each individual nozzle plus automatic nozzle-by-nozzle selection of up to 4 different nozzles to retain spray quality according to speed and spray rate - Seletron Torque Wrench is supplied with each machine. Electronic Rate Control Options RPM sensor Seletron electrically operated headland/boom end nozzle Camera(s) - up to 2 (compatible with Bravo 400s or Delta 80) Arag Joystick control of boom switching and hydraulic functions available to work with Bravo 400s, Delta 80, and ISO wired machines Syncro CanBus automated filling and wash system complete with 2" in-fill electro-magnetic flow meter, stainless steel electrically operated suction and pressure ball valves, tank content and function control panel at fill station and linked to in-cab controls and integral pressure relief valve Option Extra 3 way electric change-over valve to enable fresh water tank filling by sprayer pump Orion In-Fill Flow Meter Orion stand-alone 2" in-fill electro-magnetic flow meter complete with integral display and linked to in-cab controller (if compatible) i.e. Bravo 400s, Delta 80 or IsoBus Orion stand-alone 2" in-fill electro-magnetic flow meter with programmable read-out at fill station, linked to Bravo 400S, Delta 80 or IsoBus in- cab controller for required fill volumes with electrically operated cut-off/stop valve.