Landquip Crop Sprayers, Suffolk

JCB Fastrac Demount

+44 (0)1379 588286 | sales@landquip.co.uk

Metfield Road, Fressingfield, Suffolk, IP21 5SD, Uk Tel +44 (0)1379 588286 | Email sales@landquip.co.uk

Technical | Boom | Options | Video | Downloads

Standard features include: • Hydraulically driven transfer/agitation pump • Headlights and indicators for road use • Demount stands • Mechanical tank contents gauge • In-cab electric transfer control • Quick release pipe and hoses to rear sprayer

Superbly engineered British built sprayer to suit the 4000 series Fastrac. All machines are built to a very high specification with few options being required. The unique Alu-light boom suspension system complements the Fastrac’s suspension and gives almost perfect weight distribution. Can be supplied with a rear folding boom from 18 to 30 metres (narrow 2.5 metre transport width) Demount standard features include:- • The very best weight distribution • Quick and easy demount in around 10 minutes • Heavy duty demount jack legs • Heavy duty roller height mast and chassis (sliding height mast with rear fold boom) • Fibreglass baffled tanks • 200 litre clean water tank for flushing system • Efficient sump complete with 2” drain tap / fast fill point • Mechanical, chemical-less sight gauge • Tank washing rotaflush heads • 15 litre operator hand wash tank • Electro-hydraulic controls for boom folding • 1 tractor single acting spool valve required with approx. 25 litre/min oil flow • ‘Gull wing’ Alu-light bi-fold 18-24 metres or tri-fold 30-36 metres • Trapezium self-levelling boom • Hydraulic anti-yaw protection (Patented) • Hydraulic boom tilt • Stainless steel ½” spray lines + Poziflow pressurised spray line constant recirculation • Removable quick fit boom tube end fork fittings • Tri, quad, or quin 360o nozzle bodies + 2 sets of multi select colour coded quick fit caps • 2 sets of ceramic ISO colour coded tips • Boom pressure filters • Manual in-cab electric switching for spraying, washing out, etc • Master, pressure & 5 air switched boom sections • Bravo 180s electronics for rate control, individual boom section switching, application volume and pressure read-outs, forward speed, tank volumes, etc. • Large suction filter • PTO driven 330 litre/min. 5 cylinder piston diaphragm pump • Swing down 30 litre easy clean chemical bowl with can wash, rinse & agitation jets • 2.8 metre transport width (3.0 metres for tri-fold boom) • Spray height up to 2.3 metres • Rear LED road lights, indicators and flashing beacon • Rear full width mudguards complete with mud flap extensions • 2” fast fill point/drain complete with 2” tap • 6 metre x 2” suction/fill hose • M6-M16 stainless steel nuts & bolts + stainless steel hoseclips throughout

Factory fitted options for Demount:- • Fastrac rear deck agricultural spider frame • Manual 7 section in-cab switch box & Poziflow electric over air on/off • Air blow-out system to reduce chemical residues in boom spraylines & demount transfer hoses Options available in lieu of Bravo 180s:- • Bravo 400s LT GPS automatic boom section control of 7 Poziflow electric over air on/off boom sections c/w coverage mapping & guidance light bar • Bravo 400s CanBus GPS automatic boom section control of up to 13 sequentially switched sections c/w coverage mapping, guidance light bar + Poziflow continuous recirculation giving high pressure spray line prime & purge • Delta 80 CanBus GPS automatic boom section control of up to 13 sequentially switched sections c/w coverage mapping, guidance light bar + Poziflow continuous recirculation giving high pressure spray line prime & purge • IsoBus electronics for rate control, sequential boom section switching, application volume & pressure read-outs, forward speed, tank volumes, etc via in-cab VT display screen + Poziflow continuous recirculation giving high pressure spray line prime & purge • 450 litre/min. 6 cylinder pump (in lieu of 330 litre/min.) • Hydraulic drive for piston diaphragm pump (enables full drawbar access) • 12/24 metre LR contractors' boom c/w hydraulic 4 nozzle flip to 28 metres. Hydraulic auto re-set break-back at 12 metre hinge to protect boom outer sections. 4 nozzle, 3-directional mechanical break-back flip:- • Variable geometry booms + 2 extra spools (Std on 30m+ booms) • Independent outer section folding • Outer section hydraulic break-back (pressure relief) • Outer section auto-reset hydraulic break-back (Std on RHA3 booms) • 11 litre/min. high pressure 190 bar wash-down kit, hose reel and hand lance • Chemical hopper suction probe • Bowser 2” fast fill • Boom mounted LED blue spray pattern illumination lights • Electric switched headland / boom end nozzle • Orion stand-alone 2” in-fill electro-magnetic flow meter with display screen Available options with Bravo 400s, Delta 80 & IsoBus only:- • Joystick control • Orion stand-alone 2” in-fill electro-magnetic flow meter with programmable display at fill station with electrically operated cut-off/stop valve • Syncro automated filling & wash system c/w 2” in-fill electro-magnetic flow, stainless steel electrically operated suction & pressure ball valves, tank content & function control at fill station linked to in-cab control screen • Camera(s) - up to 2 (compatible with Bravo 400s or Delta 80) • Seletron electrically operated GPS automatic shut-off management (via Bravo, Delta or IsoBus) of each individual nozzle plus automatic nozzle-by-nozzle selection of up to 4 different nozzles to retain spray quality according to speed and spray rate. Seletron Torque Wrench is supplied with each machine • Norac UC7 3 sensor Active Roll & variable geometry independent left & right hand ultimate boom height control system • Norac UC7 severe terrain kit (if required) – additional 2 sensors • Stand-alone 3 sensor variable geometry independent left & right hand boom height control system • Umbrella fertiliser nozzles c/w seal & metering disc • Flotation wheels 620/75 R26 (1590mm dia) 5805 kg @ 40 kph 750/65 R26 (1620mm dia) 5805 kg @ 40 kph

Metfield Road, Fressingfield, Suffolk, IP21 5SD, Uk Tel +44 (0)1379 588286 | Email sales@landquip.co.uk

JCB Fastrac Demount

Technical | Boom | Options | Video | Downloads

Superbly engineered British built sprayer to suit the 4000 series Fastrac. All machines are built to a very high specification with few options being required. The unique Alu-light boom suspension system complements the Fastrac’s suspension and gives almost perfect weight distribution. Can be supplied with a rear folding boom from 18 to 30 metres (narrow 2.5 metre transport width) Demount standard features include:- • The very best weight distribution • Quick and easy demount in around 10 minutes • Heavy duty demount jack legs • Heavy duty roller height mast and chassis (sliding height mast with rear fold boom) • Fibreglass baffled tanks • 200 litre clean water tank for flushing system • Efficient sump complete with 2” drain tap / fast fill point • Mechanical, chemical-less sight gauge • Tank washing rotaflush heads • 15 litre operator hand wash tank • Electro-hydraulic controls for boom folding • 1 tractor single acting spool valve required with approx. 25 litre/min oil flow • ‘Gull wing’ Alu-light bi-fold 18-24 metres or tri-fold 30-36 metres • Trapezium self-levelling boom • Hydraulic anti-yaw protection (Patented) • Hydraulic boom tilt • Stainless steel ½” spray lines + Poziflow pressurised spray line constant recirculation • Removable quick fit boom tube end fork fittings • Tri, quad, or quin 360o nozzle bodies + 2 sets of multi select colour coded quick fit caps • 2 sets of ceramic ISO colour coded tips • Boom pressure filters • Manual in-cab electric switching for spraying, washing out, etc • Master, pressure & 5 air switched boom sections • Bravo 180s electronics for rate control, individual boom section switching, application volume and pressure read- outs, forward speed, tank volumes, etc. • Large suction filter • PTO driven 330 litre/min. 5 cylinder piston diaphragm pump • Swing down 30 litre easy clean chemical bowl with can wash, rinse & agitation jets • 2.8 metre transport width (3.0 metres for tri-fold boom) • Spray height up to 2.3 metres • Rear LED road lights, indicators and flashing beacon • Rear full width mudguards complete with mud flap extensions • 2” fast fill point/drain complete with 2” tap • 6 metre x 2” suction/fill hose • M6-M16 stainless steel nuts & bolts + stainless steel hoseclips throughout

Factory fitted options for Demount:- • Fastrac rear deck agricultural spider frame • Manual 7 section in-cab switch box & Poziflow electric over air on/off • Air blow-out system to reduce chemical residues in boom spraylines & demount transfer hoses Options available in lieu of Bravo 180s:- • Bravo 400s LT GPS automatic boom section control of 7 Poziflow electric over air on/off boom sections c/w coverage mapping & guidance light bar • Bravo 400s CanBus GPS automatic boom section control of up to 13 sequentially switched sections c/w coverage mapping, guidance light bar + Poziflow continuous recirculation giving high pressure spray line prime & purge • Delta 80 CanBus GPS automatic boom section control of up to 13 sequentially switched sections c/w coverage mapping, guidance light bar + Poziflow continuous recirculation giving high pressure spray line prime & purge • IsoBus electronics for rate control, sequential boom section switching, application volume & pressure read-outs, forward speed, tank volumes, etc via in-cab VT display screen + Poziflow continuous recirculation giving high pressure spray line prime & purge • 450 litre/min. 6 cylinder pump (in lieu of 330 litre/min.) • Hydraulic drive for piston diaphragm pump (enables full drawbar access) • 12/24 metre LR contractors' boom c/w hydraulic 4 nozzle flip to 28 metres. Hydraulic auto re-set break-back at 12 metre hinge to protect boom outer sections. 4 nozzle, 3-directional mechanical break-back flip:- • Variable geometry booms + 2 extra spools (Std on 30m+ booms) • Independent outer section folding • Outer section hydraulic break-back (pressure relief) • Outer section auto-reset hydraulic break-back (Std on RHA3 booms) • 11 litre/min. high pressure 190 bar wash-down kit, hose reel and hand lance • Chemical hopper suction probe • Bowser 2” fast fill • Boom mounted LED blue spray pattern illumination lights • Electric switched headland / boom end nozzle • Orion stand-alone 2” in-fill electro-magnetic flow meter with display screen Available options with Bravo 400s, Delta 80 & IsoBus only:- • Joystick control • Orion stand-alone 2” in-fill electro-magnetic flow meter with programmable display at fill station with electrically operated cut-off/stop valve • Syncro automated filling & wash system c/w 2” in-fill electro- magnetic flow, stainless steel electrically operated suction & pressure ball valves, tank content & function control at fill station linked to in-cab control screen • Camera(s) - up to 2 (compatible with Bravo 400s or Delta 80) • Seletron electrically operated GPS automatic shut-off management (via Bravo, Delta or IsoBus) of each individual nozzle plus automatic nozzle-by-nozzle selection of up to 4 different nozzles to retain spray quality according to speed and spray rate. Seletron Torque Wrench is supplied with each machine • Norac UC7 3 sensor Active Roll & variable geometry independent left & right hand ultimate boom height control system • Norac UC7 severe terrain kit (if required) – additional 2 sensors • Stand-alone 3 sensor variable geometry independent left & right hand boom height control system • Umbrella fertiliser nozzles c/w seal & metering disc • Flotation wheels 620/75 R26 (1590mm dia) 5805 kg @ 40 kph 750/65 R26 (1620mm dia) 5805 kg @ 40 kph